Hi Everybody
After reading how good these routers were I decided to take the plunge.
The one I have is a dual SSID set up was a breeze, all of 10 mins for the PC and Mac laptop.
My question is can the USB port be used to connect a printer so I could print from the Laptop???
Any help would be appreciated
Many Thanks
Rogerp
Not afaik, Roger, as it would need the client software to be installed on the printer - iow, it's an alternative way to connect a PC, rather than a generic USB connection.
Hi rik
cheers for the quick response I thought that might be the case but I bow to others knowledge.
one thing I am sure of it is very easy to set up, and get running and is much faster than the Linksys I have been using before.
I have a long line just over 5km and am also on a fixed 2mb line so I think I will see how it .goes over the next few weeks , have thought about ADSL Max.
regards
rogerp
What are your stats, Roger (d/s attenuation and noise margin)
Hi Rik
I presume these are the readings you want just copied these from the broadband link page
regards
Rogerp
DSL Connection Details
DSL Line (Wire Pair): Line 1 (inner pair)
Protocol: G.DMT Annex A
Downstream Rate: 2272 kbps
Upstream Rate: 288 kbps
Channel: Fast
Current Noise Margin: 13.0 dB (Downstream) 20.0 dB (Upstream)
Current Attenuation: 60.6 dB (Downstream) 31.5 dB (Upstream)
Current Output Power: 17.6 dBm (Downstream) 12.1 dBm (Upstream)
DSLAM Vendor Information: Country: {0xB5} Vendor: {TSTC} Specific: {0x00}
PVC Info: 0/38
That's them, Roger. You stand to get about 3Mbps if your line is quiet, 2.5 if it's a bit noisy.
Quote from: RogerP on Apr 29, 2008, 15:46:05
Hi Everybody
After reading how good these routers were I decided to take the plunge.
Hi Roger,
I am sure you won't regret getting the 2700. :thumb:
Like you I read all about them here on the forum and also like you I have the Dual SSID one.
Mine has got me another 500 kbps throughput of that I am certain.
I'm on:
Time Since Last Boot: 13 days 15: 33: 50
With:
DSL Down Up
Current Rate: 4128 kbs 448 kbs
Max Rate: 4128 kbs 1040 kbs
Current Connection:
Current Noise Margin: 9.0 dB 25.0 dB
Current Attenuation: 40.6 dB 26.0 dB
Current Output Power: 18.9 dBm 11.9 dBm
and without going to the BT Speed Tester I am sure that my IP Profile is 3500 kbps i.e. up from 3000 kbps with my Netgear DG 834. :)
Keep us posted.
It looks like you could see some improvement on max, but then it's rate-adaptive and more susceptible to noise. If I were you, I think I'd be inclined to stay with a fixed 2Mb service for the stability and peace of mind.
That said, I wonder if we could help you improve your stats... Is your router currently connected to an extension socket with a microfilter?
hi
I will keep you posted if anything develops, as to your question Sebby my internet connection comes straight from the Master socket directly to the router approx 2metres.
The master socket was modified by BT about 18 months ago as I had problems and an old face plate, so therefore I do not use adsl filters around the house it's all filtered at the master socket.
I am at the moment leaving the router powered up 24 hrs a day just to see if it will make any difference don't know to much about these things so that's why I read lot and then ask when I think I need to or more importantly when I just plain don't know or can't find out for myself.
I must say I am more than happy with IDNET as a provider I have had some probs but nothing that has not been sorted with just one phone call, just generally accept " it does what it says on the tin " .
Regards
rogerp
Quote from: RogerP on Apr 30, 2008, 13:57:46
The master socket was modified by BT about 18 months ago as I had problems and an old face plate, so therefore I do not use adsl filters around the house it's all filtered at the master socket.
In that case, you won't be able to improve your stats as your setup is really as good as it can be.