IDNetters Forums

Technical News & Discussion => IDNet Help => Topic started by: Tina on Mar 13, 2008, 14:48:44

Title: I have arrived
Post by: Tina on Mar 13, 2008, 14:48:44
I am now a fully fledged Idnetter - I migrated about lunch time. I had a short time where i couldn't access either ISP, so put my new details in my router, came back and I was on.
I am so happy  :yeay: Thanks to you all for your support through this process, and I looked forward to years of happy service :)
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 14:49:52
Great news, Diss.  :thumb: How are your speeds looking?
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 14:52:38
They are good - but how do I find out all the stats to post like you all do ?  I am sooo happy. Does a static IP mean it doesn't change if I unplug my router? or is that the one where it does change?
Title: Re: I have arrived
Post by: Ray on Mar 13, 2008, 14:53:13
Welcome to Idnet , Diss, enjoy.  ;) :thup:
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 14:58:01
Static IPs are yours forever, Diss, it will never change while you are with IDNet. (FWIW, I've had far fewer attempts to probe my connection since I went static than I had when using dynamic IPs).

Kitz has instructions for getting the stats from most routers:

http://www.kitz.co.uk/adsl/frogstats.htm

and a BT speed test is always worthwhile as that reveals your profile:

http://test.speedtester.bt.com:50301/
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:01:10
hehe my router isn't on there. will try the BT test
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:03:19
There's not too many she hasn't got, but I think you have one of them. When I Googled, I couldn't come up with more than a sales site, no manuals at all. The BT test will tell us sync speed, profile and throughput. We'll have to try and guess attenuation and noise margin.
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:05:25
lol your talking jargon to me now - tried the BT one five times and got this



Unexpected result received when querying the network to find your services connection details. Please try again shortly, but if this problem persists raise the issue with your service provider
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:11:18
It may be that your details haven't propagated across the BT network yet, or that the speed tester is just plain busy.

Try:

http://www.speedtest.bbmax.co.uk/

or

http://www.speedtest.net/

in the interim.
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:12:55
For comparison, I get:

(http://www.speedtest.net/result/245847983.png) (http://www.speedtest.net)

on a 3000 profile
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:13:39
Ok dunno if this means anything to you

Download Speed:     1931 kbps (241.4 KB/sec transfer rate)
Upload Speed:    376 kbps (47 KB/sec transfer rate)
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:17:42
That suggests you are on a 2000 profile, which is quite normal for your migration (LLU). Depending on the line stats which we don't know, hopefully that will rise after 3-5 days.
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:19:11
It does seem faster than before - but it's all ok?
Title: Re: I have arrived
Post by: Malc on Mar 13, 2008, 15:19:42
Quote from: dissonance on Mar 13, 2008, 15:05:25




Unexpected result received when querying the network to find your services connection details. Please try again shortly, but if this problem persists raise the issue with your service provider


Welcome to the BT Speedtest,

and  :welc: :karmic: to IDNet
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:24:28
OK, update, Diss:

Your sync speed is 7616, attenuation is 25db and noise margin a whopping 16db, so you have a very healthy line there (I'm jealous!). Your profile should increase to 6500k after 3-5 days.

I'll be round to connect!!
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:31:02
Ok I really don't  understand all of those figures , but take it it's good - how did you find it out? You can come round only if you put up a blind for me in return  :lol:
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:33:49
By comparison, Diss, I sync around 3500, my attenuation is 56db and my target noise margin is 9db. IOW, a long, poor quality line. I'm guessing that as your line settles, you may well hit full speed.

As to finding out, well I know a man who knew, so I asked. :)

I'm great at putting blinds up, btw, it's just that they don't hang very straight afterwards. ;)
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 15:36:29
I am still lost with those figures . I just know I am a very happy person right now   :cheers:
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 15:44:02
OK, let's try and shed some illumination...

Attenuation is a measure of how much the ADSL signal has 'weakened' in its journey to you, effectively it tells you how long your line is, about 2.5k/1.5miles in your case. This figure is the single biggest factor in how fast your connection will go, ie the sync speed and profile are effectively determined by attenuation. Profiles are, in fact, an artificial control, imposed by BT to suit their own ends. It's perfectly possible for your line to go as fast as it can sync, but BT don't operate like that.

The other determining factor on speed is noise margin. This is the amount of 'headroom' the router has in distinguishing the signal from the background noise. Normally, with Max, it's set at 6db and then the line syncs at the highest speed it can do with that margin. If the line proves unstable, then the sync speed will be reduced, or the target margin increased, until stability is achieved.

You have some noise margin in hand, so your line will either be very stable, or possibly get a bit faster yet.
Title: Re: I have arrived
Post by: Malc on Mar 13, 2008, 15:45:54
Hmmm, I'm learning as well,  :thumb: Rik
Title: Re: I have arrived
Post by: Lance on Mar 13, 2008, 17:13:28
Glad the migration went well, dissonance  :P
Title: Re: I have arrived
Post by: Philip on Mar 13, 2008, 17:21:45
welcome to paradise  :thumb:
Title: Re: I have arrived
Post by: cavillas on Mar 13, 2008, 17:28:58
welcome dissonance.  Hope you enjoy it on IDNET and here as long as you have a sense of humour ;D
Title: Re: I have arrived
Post by: RA-1972 on Mar 13, 2008, 18:54:27
Welcome hope you have a great time here .  :welc:
Title: Re: I have arrived
Post by: Noreen on Mar 13, 2008, 18:55:22
(http://bestsmileys.com/welcome/19.gif) Diss!
Title: Re: I have arrived
Post by: Tina on Mar 13, 2008, 18:56:54
heehe you guys are lovely- thanks for the welcome.. can't believe I am here :)
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 18:59:51
Feel sorry for BPP (David), Diss. He travelled the same road as you, but BT & Tiscali put every obstacle they could in his path - I think it was about a month in all before IDNet could get him connected.
Title: Re: I have arrived
Post by: Lance on Mar 13, 2008, 19:00:25
It seems with those two companies, it really can be pot luck!
Title: Re: I have arrived
Post by: Rik on Mar 13, 2008, 19:04:22
In David's case it was all bad luck.  :(
Title: Re: I have arrived
Post by: Simon on Mar 13, 2008, 21:25:32
Glad to hear you've arrived OK, Diss!  :thumb:
Title: Re: I have arrived
Post by: LesD on Mar 16, 2008, 21:18:45
Quote from: Simon on Mar 13, 2008, 21:25:32
Glad to hear you've arrived OK, Diss!  :thumb:
Me too :thumb:
Title: Re: I have arrived
Post by: Tina on Mar 17, 2008, 02:05:29
Finally got the BT speed  test to work Rik. Here are my results


QuoteIP profile for your line is - 2000 kbps
    DSL connection rate: 448 kbps(UP-STREAM)  7616 kbps(DOWN-STREAM)
    Actual IP throughput achieved during the test was - 1874 kbps


Means nothing to me  :blush:
Title: Re: I have arrived
Post by: Rik on Mar 17, 2008, 08:24:02
Hi Diss

You're probably on an interleaved line, to judge by the sync speed, but your profile should be 6500. I think it was Thursday you migrated? If so, give it till Wednesday, then give IDNet a call if the profile hasn't lifted. It's very common, unfortunately, for the initially assigned 2000 profile to 'stick' with migrations. Otherwise, your throughout is about right for the profile you do have, so it's looking good.
Title: Re: I have arrived
Post by: Sebby on Mar 17, 2008, 13:24:42
As Rik says, the profile should clear by Wednesday; stuck profiles are very common following migrations, so nothing to worry about. Another thing to mention is that your line might be good enough to have interleaving switched off, which would potentially give you a slightly higher sync and profile. But it might not be worth potentially losing stability. ;)