I've sat watching my synch speed at 8093 for 3 days and now my data rate has just upped to 7000 and my speed is 6613 according to the BT test.. woohoo.. I'm all excited.. :evilb: :banana2:
Good innit.. ;)
Mine has been like that ever since I joined IDNet.. ;)
Shaddup you two, my shirt has just turned green. ;)
Quote from: Inactive on Oct 09, 2007, 01:42:11
Good innit.. ;)
Mine has been like that ever since I joined IDNet.. ;)
Ditto, Bt speed test this morning 6786 kbps. ;D
I'm going into the corner to have a good cry. :'(
was on "orange broadband" at .2kbps (note point) i am point 9 km from exchange, was with them on freeserve dialup, then wanadoo broadband, then orange, prior to orange was not too bad.
then orange said .2 was the best they could do ,due to BT problems
changed to idnet, and instantly went to 4.9 mbps ,and been like it for two months now
wonder what happened to the BT problems ???
keep it going idnet
Hi Merlin, and (http://rik.www.idnet.com/Smileys/welc_idnetters.png) Have a welcome karma! :)
Quote from: merlin1 on Oct 23, 2007, 22:08:16
was on "orange broadband" at .2kbps (note point) i am point 9 km from exchange, was with them on freeserve dialup, then wanadoo broadband, then orange, prior to orange was not too bad.
then orange said .2 was the best they could do ,due to BT problems
changed to idnet, and instantly went to 4.9 mbps ,and been like it for two months now
wonder what happened to the BT problems ???
keep it going idnet
Merlin1 you must have a very good line to get 4.9mb at 9km from the exchange, I get 2mb at 5km.
Glenn, i think you misread that, i am POINT 9 km from the exchange
That's a bit slow then really isn't it? I'm further away from the exchange with a faster speed.
We need line stats. :)
Quote from: merlin1 on Oct 24, 2007, 08:57:23
Glenn, i think you misread that, i am POINT 9 km from the exchange
I think I did :-[
Don't worry, Glenn. I missed it altogether. ;)
I seem to be 1.7km from the exchange and from memory have a line attenuation of 39 and the noise margin reading was 12 and a synch speed of 8093.
I read all about this last night but still can't get into my head what it all means and how it works. I never was any good at physics and stuff. It's probably why I ended up doing philosophy at university :crazy:
I agree, speeds are so much faster here, before Id I was around 6100, now I can get 8000 and I'm about half a mile from the exchange.
Odd how you can get so much more out of the same line by changing ISP.
Quote from: tortoise on Oct 24, 2007, 12:52:15
I seem to be 1.7km from the exchange and from memory have a line attenuation of 39 and the noise margin reading was 12 and a synch speed of 8093.
Hi Ann
An attenuation of 39db would suggest a cable run of 3-3.5km, but that's very dependent on the quality of the cable, if it's thin aluminium, it will have higher attenuation than thick copper, for example.
Your synch speed is probably 8095, just short of the maximum possible, so you should have a profile of 7000.
The noise margin is the amount of headroom the router has before it can no longer distinguish the ADSL signal from the noise on the line. It's not the same as a signal-to-noise ratio, but it is related. The target for an ADSL Max line is 6db, but if you sync at, or near, the max, then the margin will be larger, meaning you have more headroom and, thus, more stability.
somewhere on this forum i have already posted this question, but now i can't find it anywhere ??
so at the risk of repeating myself, how do you measure your line attenuation, sync ,snr, etc etc
keep it simple please,
thx
What router or modem are you using?
The answer is probably at:
http://www.kitz.co.uk/adsl/frogstats.htm
Quote from: Inactive on Oct 09, 2007, 01:42:11
Good innit.. ;)
Mine has been like that ever since I joined IDNet.. ;)
/signed.
RIK
i'm using a netgwear ADSL2+MODEM ,supplied and setup by idnet, model number DM111P
it has a single output, but that's all i need.
i tried the web site you suggested , but they did not list my model, so how do i find out my stats now??
is there another and better router/modem out there which maybe i should change to.??
You might try the instructions for the Netgear DG834 that she does mention.
As Colin says, try the DG834 instructions, otherwise, give support a ring or email and they should be able to tell you how to extract the information.
Edit: Name corrected :-[
Quote from: merlin1 on Oct 24, 2007, 19:16:05
i tried the web site you suggested , but they did not list my model, so how do i find out my stats now??
I just Googled for the manual. It says:
Use the modem management utility to configure the Internet connection as follows:
1. On your PC, open a Web browser, such as Microsoft Internet Explorer, and type the URL
http://192.168.0.1. in the address box. A dialog box will be displayed prompting you for a user
name and password.
2. Type admin for the user name, password for the password, and click OK to open the main
utility window in your web
Viewing the ADSL Status
From the Maintenance section of the main menu, click ADSL Line Status.:
The upper table indicates how the modem has detected the ADSL parameters are configured,
except for the "Line Up Time", which indicates the time elapsed since the last reset or power
cycle.
The lower table provides information about the quality of upstream and downstream data. These
statistics will be of interest to your technical support representative if you are having problems
obtaining or maintaining a connection.