Author Topic: Netgear DG834 (G) v1-4  (Read 2626 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve

  • Former Staff
  • *****
  • Posts: 20635
  • Karma: 497
Netgear DG834 (G) v1-4
« on: Nov 01, 2010, 13:02:15 »
Model

Netgear DG834(G) v1-4

Modem
ADSL1,
ADSL2,ADSL2+,ADSL2+ Annex M – all firmware dependent


LAN Connectivity
4x10/100Mbps

Router

DHCP relay,DMZ,DNS forwarding,NAT routing,port forwarding (single or ranges)
PPP autoconnect,RIPv1-2,UPNP,DHCP server,PPPOE client

WiFi

G model
Single SSID –default NETGEAR
Access point mode
WEP 64-128
Wireless modes ‘b’ ‘g’
External Antenna
Later firmware support WDS,Mulitpoint bridge and repeater mode WPA2 ,WPA2-PSK


Firewall
DoS protection
Firewall log
Keyword filtering
MAC filtering
SPI firewall
URL filtering


VPN
IPSec client,passthrough and server,8 simultaneous tunnels
L2TP passthrough
PPTP passthrough
RADIUS support



Hardware Info

Firmware upgradable
Chipset  TI AR7 v1 -3      Broadcom  BCM 6348 v4
NTP Server
DDNS client
SNMP v1 -2
Event logging


Configuration

Backup/Restore functionality
Quick configuration wizard
Remote configuration
Telnet/CLI
Web based configuration
Default IP address 192.168.0.1
Default Username - admin
Default admin password - password



Support.

Website www.netgear.com
Manual/firmware http://kb.netgear.com/app/products/family/a_id/1288
Forum  http://forum1.netgear.com/
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.


Show unread posts since last visit.
 

Any information and links published in the forum are posted in good faith, but the forum staff and
owners cannot and do not accept responsibility for the content and accuracy of external websites.